Announcement

Collapse
No announcement yet.

3D Test fail in Windows XP Pro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3D Test fail in Windows XP Pro

    Hello,

    I have a question about an error message I received in burn in test. The error says that the 3D test was interrupted it occured only once and the test finished. Here is the full test log that was saved.


    PassMark BurnInTest Log file - http://www.passmark.com
    ================================================== ======
    BurnInTest V5.3 Pro 1034
    Logging detail level: Normal
    ******************
    SYSTEM INFORMATION
    ******************
    Computer Name: CUSTOMER-6E3685
    Date: 10/12/08 16:06:54
    Operating system: Windows XP Professional Service Pack 3 build 2600
    Number of CPUs: 1 (2 Core(s)/CPU, 1 Logical(s)/Core)
    CPU manufacturer: GenuineIntel
    CPU type: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz
    CPU features: MMX SSE SSE2 SSE3 DEP PAE
    CPU1 speed: 2133.4 MHz
    CPU L2 Cache: 4 MB (L3 Cache: 4 MB)
    RAM: 2045 MB
    Video card: NVIDIA GeForce 8800 GTX (Resolution: 1024x768x32)
    Disk drive: Model ST9100821AS (Size: 93.2GB)
    Optical drive: TEAC DV-516GB

    **************
    RESULT SUMMARY
    **************
    Test Start time: Sat Oct 11 15:30:22 2008
    Test Stop time: Sun Oct 12 15:30:26 2008
    Test Duration: 024h 00m 04s
    Test Name Cycles Operations Result Errors Last Error
    CPU - Maths 40169 9.040 Trillion PASS 0 No errors
    CPU - SIMD 28112 8.125 Trillion PASS 0 No errors
    Memory (RAM) 334 415 Billion PASS 0 No errors
    2D Graphics 730 730870 PASS 0 No errors
    3D Graphics 4166 8.334 Million FAIL 1 The 3D test was interrupted
    Disk (C: ) 98 196 Billion PASS 0 No errors
    CD/DVD (D 30 22.753 Billion PASS 0 No errors
    Sound 347 1.160 Billion PASS 0 No errors
    Network 1 17626340 141 Billion PASS 0 No errors
    TEST RUN FAILED
    ******************
    DETAILED EVENT LOG
    ******************
    LOG NOTE: 2008-10-11 15:30:23, 3D Graphics, 3D test starting: Duty cycle = 100. Test on primary monitor (0). (x,y) = (310,200). WxH = 300x200.
    WARNING : 2008-10-11 15:32:01, 3D Graphics, The 3D test was interrupted
    LOG NOTE: 2008-10-12 15:30:30, Status, Test run stopped
    Any ideas as to what might cause this error?

  • #2
    The 3D test can be interrupted if the system goes into a sleep state during the test, or the user closes the 3D test window. If the 3D test is the fullscreen non-windowed test, then the test can be interrupted by Alt-tabbing out of the 3D context.

    This is not a 3D subsystem error, but rather a flag that the test did not run for the full period. Once the 3D test is interrupted, it does not restart - hence you will only see one occurance of this error message.

    Regards,
    Ian

    Comment


    • #3
      Ok, thank you for the reply. I tested the system again overnight and it passed with out any problems.

      Comment

      Working...
      X