Announcement

Collapse
No announcement yet.

NIC Loopback

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ian (PassMark)
    replied
    Please see section "7.7 Test Preferences -> Network" in the user guide:
    http://passmark.com/ftp/BIT_Users_Guide_Ed6_0.pdf

    Esentially if you system has 3 NICS, you need to put 3 Network addresses in perferences, check them, and select "Test all available NICs". The address of 127.0.0.1 will test the internal loopback, while an addresses will test the port more fully (such as the external physical connectors).

    Regards,
    Ian

    Leave a comment:


  • wcnackers
    started a topic NIC Loopback

    NIC Loopback

    I have a computer with 3 NIC ports. I want to run loopback tests on each port. Do I simply put 127.0.0.1 in Network Address 1, 2 and 3 and then check them as active? How do I know each port is being tested? How do I know which port is which?

    Thanks!
Working...
X