RAID 0 Speed Problem - 550 MBps Write Speed too high

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • merlin
    replied
    RAID 0 Performance

    Are you using a hardware SATA RAID controller something you brought and put into a PCI-e slot and not the one that came with the motherboard?

    I agree with the Passmark admin It sounds like its the cached speeds that Passmark is reading.

    Leave a comment:


  • David (PassMark)
    replied
    I agree the numbers look a bit strange as they exceed the SATA interface spoed (300MB/sec for SATA 3GBit). We don't have a 6 drive RAID config to test with, and we couldn't reproduce numbers like this with a single drive.

    Do you get similar numbers with a smaller block size?
    Do you get similar numbers with a larger test file (at least double your RAM size)?

    Leave a comment:


  • Moharram
    replied
    RAID 0 (Stripping)
    3 GB of RAM
    Windows XP
    on drive (850 GB) (6 * SATA)
    AMD 64X2-DualCore 6000+

    Leave a comment:


  • David (PassMark)
    replied
    What RAID level are you running?
    How much RAM is in the machine?
    What O/S are you using?
    What type of drives are they?
    What CPU do you have?

    Leave a comment:


  • Moharram
    replied
    Sorry
    please check these urls:

    http://link.imgshare.us/ajjJy0

    http://link.imgshare.us/ajjJdu

    Leave a comment:


  • David (PassMark)
    replied
    The link you have posted is to a private forum that no one has access to. So no one can see your image.

    Leave a comment:


  • Moharram
    replied
    Thr Result of PerformanceTest is Below:
    http://barnamenevis.org/forum/attachment.php?attachmentid=12333&d=1195399151


    as shown in the graph : SPEED = 478 MBps

    Leave a comment:


  • David (PassMark)
    replied
    You have to be careful to make sure you are no just measuring the cache speed.

    If you are getting 550 MBytes/Sec (as opposed to 550Mbit/sec) then I think you are measuing the disk cache speed and not the real disk speed.

    Leave a comment:


  • RAID 0 Speed Problem - 550 MBps Write Speed too high

    hi

    i have 6 SATA Hard Disk with RAID Controller that create a drive with 850 GB Volume...

    when i test the speed with PerformanceTest i gain the speed between 450 to 550 MBps Write Speed ...

    but in my program i can't acheive for this rate...

    i use CFile in MFC Application and try to write to hard and calculate speed.
    in the best case my speed is 115 MBps..

    is there any programming techniques ... ???

    thanks
    Last edited by Moharram; Nov-13-2007, 04:28 PM.
Working...