If you right click on the wirelessmon.exe, choose properties and then click on the Compatibility make sure the "Run this program as administrator" options is checked.
Announcement
Collapse
No announcement yet.
Reg Problem Started by WirelessMon err msg
Collapse
X
-
This seems to be a problem with WirelessMon not automatically selecting to run as in elevated administrator mode.
If you right click on the wirelessmon.exe, choose properties and then click on the Compatibility make sure the "Run this program as administrator" options is checked.
-
The new version didn't work; I sent the debug log by email. One thing further though. uninstalling and then install\ing didn't make a difference (error box still occurred), but yet it worked fine the very first time it was installed.
Leave a comment:
-
This error message is practically redundant for Vista so it will probably be changed or removed in the next version.
We've made a change that might help, please try this version http://www.passmark.com/ftp/wirelessmon2.0.1012a.exe. There is also some extra debugging added when loading the performance counters so if it doesn't work please run WirelessMon in debug mode and send me the log file.
There was also a resource leak found in the Vista version so this should be corrected in this version.
Leave a comment:
-
Reg Problem Started by WirelessMon err msg
OS: Win Vista Home Premium
WirelessMon Version: 2.0 build 1011 (evaluation version)
Description of anomaly:
I set WirelessMon running continuously starting ~3AM with logging turned on. went to bed. Next morning, my computer was asleep, too (sleep mode). I wake it up by moving the mouse. Everything turned back on except my monitor which remained blank. I power cycled my system to restart. After OS loaded, ran WirelessMon.
It returned this error message:
I go into regedit to examine location. This is what I see:
There is no such entry mentioned by the error message. Which entry needs to reset to zero?
This error message never appeared before. I downloaded the program yesterday.
log attached:
Summary Tab Information
_________________________
Current Ssid: WRT300N
AccessPoint Mac Address: 00 18 f8 c5 47 d8
Threshold: N/A
Authorization Type: Open
Numbers of Antenna: N/A
Packet Fragmentation Threshold: N/A
Tx Power: N/A
Channel: 3
Channel(Hz): N/A
Statistics Tab Information
_________________________
TransmitttedFrameCount: 38097
MulticastTransFrameCount: 0
Failed Count: 3
Retry Count: 4016
Multiple Retry Count: 2165
RTS Success Count: 0
RTS Failure Count: 0
Frame Duplicate Count: 87
Received Fragment Count: 487727
ACK Failure Count: 7083
MulticastRecFrameCount: 0
FCS Error Count: 368660
Sent OK: N/A
RCV OK: N/A
Sent Error: N/A
RCV Error: N/A
Directed Bytes Sent: N/A
Directed Frames Sent: N/A
Multicast Bytes Sent: N/A
Multicast Frames Sent: N/A
Broadcast Bytes Sent: N/A
Broadcast Frames Sent: N/A
Directed Bytes RCV: N/A
Directed Frames RCV: N/A
Multicast Bytes RCV: N/A
Multicast Frames RCV: N/A
Broadcast Bytes RCV: N/A
Broadcast Frames RCV: N/A
IP Tab Information
_________________________
Adapter Mac Adress: 00 18 f8 30 9a 88
Adapter Detail Entry: {C9A87EBA-9DB6-4B81-821F-42F0B3831F65}
Adapter IP Address: 192.168.1.102
Current GateWay: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
DHCP Lease Start at: 03:19:31 28/03/2007
DHCP Lease End at: 03:19:31 29/03/2007
DNS Server:
Tags: None
Leave a comment: