Announcement

Collapse
No announcement yet.

S.M.A.R.T. ERROR during test

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • S.M.A.R.T. ERROR during test

    i'm using a version 5.3 (1022)
    the folowing log has been created:
    i need to know if the H.D was too hot or too cold?
    also where can i see the S.M.A.R.T thershold in the software?

    -------------------------------------------------------------
    DETAILED EVENT LOG
    ******************
    LOG NOTE: 2006-04-20 08:02:56, Disk, C, SMART Reallocated Sector Count start value: 0, current value 0
    LOG NOTE: 2006-04-20 08:04:52, Status, Activity event 68
    ****************************************
    RESULT SUMMARY - INTERIM PERIODIC REPORT
    ****************************************
    Test Start time: Thu Apr 20 04:40:52 2006
    Current time: Thu Apr 20 08:04:52 2006
    Test Duration: 003h 24m 00s
    Test Name Cycles Operations Result Errors Last Error
    CPU - Maths 2627 299 Billion PASS 0 No errors
    CPU - SIMD 2035 275 Billion PASS 0 No errors
    Memory (RAM) 19 26.918 Billion PASS 0 No errors
    2D Graphics 173 173517 PASS 0 No errors
    Disk (C: ) 67 53.909 Billion PASS 0 No errors
    Serial Port 1 155 8.956 Million PASS 0 No errors
    Serial Port 2 151 8.727 Million PASS 0 No errors
    Serial Port 3 154 8.916 Million PASS 0 No errors
    Serial Port 4 155 8.935 Million PASS 0 No errors
    Serial Port 5 155 8.930 Million PASS 0 No errors
    ******************
    DETAILED EVENT LOG
    ******************
    SERIOUS : 2006-04-20 08:05:59, Disk, C: SMART Threshold exceeding condition detected.
    LOG NOTE: 2006-04-20 08:05:59, Disk, Attribute: Temperature Difference from 100
    LOG NOTE: 2006-04-20 08:05:59, Disk, C, SMART Reallocated Sector Count start value: 0, current value 0
    LOG NOTE: 2006-04-20 08:07:52, Status, Activity event 69
    ****************************************
    RESULT SUMMARY - INTERIM PERIODIC REPORT
    ****************************************
    Test Start time: Thu Apr 20 04:40:52 2006
    Current time: Thu Apr 20 08:07:52 2006
    Test Duration: 003h 27m 00s
    Test Name Cycles Operations Result Errors Last Error
    CPU - Maths 2666 304 Billion PASS 0 No errors
    CPU - SIMD 2064 279 Billion PASS 0 No errors
    Memory (RAM) 20 27.389 Billion PASS 0 No errors
    2D Graphics 176 176048 PASS 0 No errors
    Disk (C: ) 68 54.693 Billion FAIL 1 SMART Threshold exceeding condition detected.
    Serial Port 1 157 9.085 Million PASS 0 No errors
    Serial Port 2 153 8.853 Million PASS 0 No errors
    Serial Port 3 157 9.047 Million PASS 0 No errors
    Serial Port 4 157 9.068 Million PASS 0 No errors
    Serial Port 5 157 9.062 Million PASS 0 No errors
    ----------------------------------------------------------------------

  • #2
    You can use the free DiskCheckup software to check the full set of SMART values for your drive.

    The drive is much more likely to be too hot rather than too cold.

    Comment


    • #3
      hi

      thanks for the replay
      our test is run under extreme conditions -40C to + 55c:
      the H.D is seagate EE series.
      we also use heater to heat the H.D so it wont get too cold.

      Comment

      Working...
      X