"error while writing to disk"..with the USB gold tree setup.

[pria]

Hi,

I have setup the USB gold on my laptop M/c which is running windows vista sp1.

http://compliance.usb.org/index.asp?...at=Standard#11

As per the setup, which ever device that is connected to the HS5 like the USB card reader and USB flash drive.
When I try running Bitpro disk test on these devices and run the ACPI s1 s3 s4 in parallel i get the following messages.

1."Error while writing to disk"..
2. Data verify failure.
3. Test could not be created check access privileges.

Note:
1. I have made sure I have done a proper format on these devices before I run the bitpro disk test.
2. Also these devices are 1-2GB size.
3. When i dont run ACPI, the disk test runs fine without any error.

Pls help.

[David (PassMark)]

Do you mean you are putting the machine into a sleep state (S1 to S3), midway through the test?

There are a lot of device drivers that doesn't support sleep and hibernation correctly. It is rare we come across a machine on which all the conncted hardware works correctly for sleep and hibernation.