Burn in Test 5.3 Pro (1036) Win 32 freezes sytem

[andreas22]

Hello my name is Andreas I have the following Problem:

My system freezes after about 1 minute after starting the Burn in Test .
Im only starting the CPU Test and the Ram Testat load 100.

My system is stable under other known Test Utilities.
To see if it is a Bios issue,i changed all settings to auto ( no overclocking!)
Vista Ultimate 32

My system:
Intel Q 6600
Mainboard: Asus P5Q-E
Ram: G-Skill DDR2 RAM 800 CL4 (2x2GB)
Power: be Quiet 400W straight Power Dual Rail
Multimedia Device :Asus EAH4850 1GB DDR3 memory
Raid 0 AHCI (2x WD 640 Black Caviar 7200rpm; 32 mb)
Chassis Raidmax: 1x80 cm ;2x 120mm vent.

CPU Temp idle 22 °C max 45 °C
GPU Temp idle 40 °C max 50°C

Any suggestions ? Thank you

[David (PassMark)]

I would try swapping out your RAM.
And / or getting a 2nd opinion on the RAM reliability using memtest86

[andreas22]

Thank you for your kind answer.
I now tested the RAM with memtest86 3.4a iso for several hours. No errors.

I also tested Burn in Test testing only RAM -> ok.
Testing CPU -> ok.
Testing both at the same time -> system freezing.

[David (PassMark)]

I don't know if there is any easy way to isolate the problem from here.

If you had parts available, I would swap the RAM, then re-test. The swap the CPU then retest. Then try a Windows O/S reinstall just in case it was a device driver issue. Then I would swap the motherboard and power supply. But it could be some type of subtle issue, like EMI.

If you have no parts, (but have some time) try using only a single stick of RAM, then swapping it for the other stick.