LiteOn IHOS104-06 Test Problems

[Andy@GamersPC]

Hi,

We are having an issue where burnin fails serious error on any LiteOn IHOS104-06 blu-ray drive. Using the latest version.


Thanks

[David (PassMark)]

What is the actual error?
What O/S?
How long does it take?
What test settings?
Is it repeatable?
Was this just one LiteOn unit? If not how any units and was it 100% of units?
Did blu-ray units from other vendors work OK in the same test setup with same media?

[Andy@GamersPC]

I'll get the exact error in the morning.
Windows 7 HP 64 BIT.
2 - 3 minutes.
0 time burnin with cd/dvd read/ram/hdd/3d/2d/cpu/video playback
Have tried 30 drives. Same problem on all. Replaced drive with LG blu-ray and works fine. Same setup, same media yep.

Thanks

[David (PassMark)]

So you were reading pressed (read only) DVD media on the drive?
Or you were burning a RW+- DVD, or maybe a CD?

In addition you should repeat the test on the drive without having all the load on the system. Might just be a failure that occurs under high system load. e.g. a time out, or temperature related issue.

[Andy@GamersPC]

Tried it on 20% load and same problem.

Using a normal CD in the drive. Using a Blu-Ray disk has same problem.

Tried on different motherboards same problem.

Had problem for past year on every PC i've tried Burnin on.

LG Blu-Ray ROM also has the same problem on every model.
LG Blu-Ray Writer also has the same problem on every model.

LOG NOTE: 2013-04-04 09:43:08, Status, PassMark BurnInTest V7.0 Pro 1017 (64-bit)

LOG NOTE: 2013-04-04 09:43:08, Status, Main Tests started

LOG NOTE: 2013-04-04 09:43:09, 3D Graphics, 3D test starting: Duty cycle = 100. Test on primary monitor (0). (x,y) = (0,600). WxH = 300x200.

LOG NOTE: 2013-04-04 09:43:11, Video, Video test starting: Duty cycle = 100. Test on primary monitor (0). (x,y) = (520,294). WxH = 640x400.

SERIOUS: 2013-04-04 12:12:19, Optical disk, D: Checksum failure for optical disk file

LOG NOTE: 2013-04-04 12:12:19, Optical disk, File: D:\Data\Maps\CutScene\CS_6_21A.GMX.CLZ, Cycle: 19, Checksum expected: 1287092400, Checksum read: 1285121587

LOG NOTE: 2013-04-04 12:12:25, Status, Test run stopped Test Start time Thu Apr 04 09:43:08 2013 Test Stop time Thu Apr 04 12:12:25 2013 Test Duration 002h 29m 17s Temperature CPU 0 average (Min/Current/Max) 47.0C / 49.8C / 60.8C Temperature CPU 0 core 0 (Min/Current/Max) 44.0C / 46.0C / 58.0C Temperature CPU 0 core 1 (Min/Current/Max) 48.0C / 50.0C / 62.0C Temperature CPU 0 core 2 (Min/Current/Max) 49.0C / 51.0C / 64.0C Temperature CPU 0 core 3 (Min/Current/Max) 47.0C / 52.0C / 59.0C Temperature HDD 0 (ATA ST2000DM001-1CH1 SCSI Disk Device) (Min/Current/Max) 25.0C / 25.0C / 26.0C Temperature GPU 0 (nVIDIA) (Min/Current/Max) 30.0C / 44.0C / 46.0C Test Cycles Operations Result Errors Last Error CPU 308 3.531 Trillion PASS No errors Memory (RAM) 445 10.692 Trillion PASS No errors 2D Graphics 2 17495 PASS No errors 3D Graphics 81 2.457 Million PASS No errors Temperature - - PASS No errors Optical disk (D 20 28.910 Billion FAIL 1 Checksum failure for optical disk file Optical disk (E 16 22.196 Billion PASS No errors Video Playback 4992 PASS No errors Disk (C 9 391 Billion PASS No errors

[David (PassMark)]

> Replaced drive with LG blu-ray and works fine

> LG Blu-Ray Writer also has the same problem on every model

You are contradicting yourself here?

I don't think there is any such thing as a normal CD or blu-ray disk. A lot of them have deliberate fault for copy protection reasons.

This disk you are using has this file "CS_6_21A.GMX.CLZ", which is part of the 'Tomb Raider: The Angel of Darkness' game. So copy protection is likely on such a disc.

I would suggest instead using the media we sell,
http://www.passmark.com/products/testcddvd.htm

Or making your own,
http://www.passmark.com/products/cdmaker.htm

Then also changing the test mode in BurnInTest to use these pre-made discs with known content.