Announcement
Collapse
No announcement yet.
Burnintest 3d Test RTX 4090
Collapse
X
-
Yes GPU EU (Execution unit) or video memory would be the likely cause in the case of a GPGPU test failure. (with some change it could be a video card device driver bug)
-
Can you,
1) Add in the GPGPU test.
2) Increase the size of the 3D test window to match the monitor's size. But it might be hard to load a 4090 without a fairly large resolution (e.g. 4K or better).
AND / OR
3) Add a 2nd monitor and run the 3D test on both monitors with a larger window.
4) Try lowering the load on the CPU slightly, as if the CPU is super busy, it can't feed the data to the GPU.
Leave a comment:
-
Burnintest 3d Test RTX 4090
Hi,
I have a system to test with a 13900K and a RTX 4090
My current setting are
CPU 80
3D 100
RAM 80
HDD 50
The gpu does not seem to be getting much stress at all and only hitting 40 Degrees C and i feel its not fully testing the card, I know the 13th gen support is on its was, is this the same for the latest nvidia cards also?Tags: None
Leave a comment: