Network test for Intel LAN

[angus0723]

How to do a correct setting to have nice test result of INTEL LAN (i218LM & i210AT) ?
Cause it is very easy to have issue about "timeout waiting for packet" ..
below is my platform data
1. platform : Broadwell U (i7-5650U & i3-5010U)
2. O/S : Win7
3. LAN : on-boad Intel LAN i218LM(pHY LAN) ,Intel LAN i210AT
4. test item : BunrIn Test7.0 ,Standard Network test ,Bad packet generates error (timeout=4000mS)
thank you

[David (PassMark)]

You might want to upgrade to BurnInTest V8.1.
There have been a lot of changes.

If you are getting time outs then it might be an issue that the remote machine (I assume you are using a remote IP address) is dropping packets. Or it might be a networking issue with your switch / router. I assume you aren't running the test across the Internet?

[angus0723]

Hello ,David
For BurnInTest ,I use the CAT-5 LAN cable which has 100M length ,and it is crossed .
One side is connect to Broadwell platform and one side is connect to Haswell platform .
There is no switch/router between these two machine .
I have these two machines ping IP each other first to confirm the cable connecting is no problem then do Standard Network test .

For Internet ,I've try to test the speed on www.speedtest.net ,then the result of
download/upload are around 89.32Mbps/90.91Mbps .

thank you ..

[angus0723]

updated ...
The Advanced Network test is passed (no errors within 24hrs) ,but Standard network test has over 10 errors within 24hrs ..