burntest V11 disk FAIL

[cahozhang]

hI
DISK run less than 15 minutes disk error, help to see what is the problem

[Richard (PassMark)]

It looks like the several drives disappeared from the system during testing, the error code 433 (ERROR_NO_SUCH_DEVICE).

SERIOUS: 2025-02-27 15:58:11, Disk (H:), WriteFile error : H:\BurnInTest test files\~bittestH00009, block 1033 (433)
SERIOUS: 2025-02-27 15:58:11, Disk, H: Error while writing to the disk
SERIOUS: 2025-02-27 15:58:11, Disk (G:), WriteFile error : G:\BurnInTest test files\~bittestG00009, block 1111 (433)
SERIOUS: 2025-02-27 15:58:11, Disk (H:), Write File Block: H:\BurnInTest test files\~bittestH00009, Block Size: 4194304, Block Num: 1034, Ops: 84326481920 (B)
LOG NOTE: 2025-02-27 15:58:11, Disk, A device which does not exist was specified. (433)

And subsequent System Event errors suggest the same, i.e.

LOG NOTE: 2025-02-27 15:58:12, System Event, 11929 - Description: An error was detected on device \Device\Harddisk7\DR55 during a paging operation.
LOG NOTE: 2025-02-27 15:58:12, System Event, 11930 - Warning, Event ID: 0x00000033, Source: disk (Generated time: 2025-02-27 15:58:11)
LOG NOTE: 2025-02-27 15:58:12, System Event, 11930 - Description: An error was detected on device \Device\Harddisk7\DR55 during a paging operation.
LOG NOTE: 2025-02-27 15:58:12, System Event, 11931 - Warning, Event ID: 0x00000033, Source: disk (Generated time: 2025-02-27 15:58:11)

Also, it doesn't make sense running all the tests at 100% duty cycle. See the following page for guidance on setting the appropriate duty cycle.

BurnInTest Duty Cycle Settings

[cahozhang]

Hi
burntest Disk at 100% loading and 99% read/write
What's the difference?

[David (PassMark)]

The level of load.
99% has short sleep periods in the test cycle.