BURNInTest V11, Build 1013 issues with Parallel Port Test with Windows 11 and HVCI.

[ComarkSW]

We have a report from testing BURNInTEST Version 11, Build 1013 with the ParallelPort test,

Parallel port test fails and returns error 64 stating "Could not detect the parallel port selected" when testing on Windows 11 with HVCI (memory integrity protection) enabled.

Parallel port test fails and returns error 60 "Error loading Parallel port device driver. Check administrator privileges." with HVCI disabled.

The application is always run with Administrator privileges.

The operating system is Win11 IoT Ent LTSC 2024.

The base hardware is using the Advantech PCE-5132. The physical parallel port is sourced from an NCT6776D Super I/O on the LPC bus. Other functions used from this device (such as Serial Ports and H/W Monitor) work fine.

[ComarkSW]

Please update all references to "HECI" with "HVCI" (including the title).

[ComarkSW]

Further updates:
1. I was told by the technician later that they have an email thread going.
2.The O/S is installed to a single drive. This is the same drive that BURNInTEST is installed to and executed from.
3. The same errors occur with Windows Server 2025.
4. Set the Parallel Port mode to simple Standard Parallel port in the BIOS. No change in result.
5. Set the Parallel Port mode to detect only. Same error "Error loading Parallel port device driver. Check administrator privileges."

For some reason it appears that build 1010 works. Need to backtrack further to confirm no missing resources with 1013.

[ComarkSW]

Correction, version that is working is 1011.