BurnInTest v10/11 and Nvidia GeForce RTX 5060 Ti 8GB (under Win 10 2019 IoT Ent LTSC)

[KnyaZH]

Hi Team!

I am currently testing a system configuration running rare Windows 10 IoT Enterprise 2019 LTSC with an Nvidia GeForce RTX 5060 Ti 8 GB graphics card, and I have encountered a rather unusual issue.
During BurnInTest, the entire system suddenly freezes after approximately 7–30 seconds. The PC becomes completely unresponsive and requires a hard reset.
After several tests, I managed to identify the issue to the 2D Graphics Test:
- 2D Graphics Test enabled: The entire system freezes after 7–30 seconds
- 2D Graphics Test disabled: BurnInTest runs without any problems
- Same system configuration with an NVIDIA GeForce RTX 3060: All tests pass successfully, including the 2D Graphics Test.

This suggests that the problem might be related to the combination of the RTX 5060 Ti, its graphics driver, and Windows 10 IoT Enterprise 2019 LTSC.
I have tested the system with both PassMark BurnInTest v10 and v11 , and the behavior is identical in both cases.

Has anyone experienced similar freezes with the RTX 50-series graphics cards during BurnInTest?
Could this be related to driver compatibility, Direct2D/GDI operations?
What diagnostic information, log files, or test results would you need to investigate this issue further?

Configuration:
CPU: Intel Core i7-10700
RAM: 1x 16 GB DDR4
GPU: NVIDIA GeForce RTX 5060 Ti 8 GB
SSD: 500 GB SATA
OS: Windows 10 IoT Enterprise 2019 LTSC (64-bit)
Windows Updates: All available updates installed
NV Driver: 617.42-desktop-win10-win11-64bit-international-nsd-dch-whql

I would really appreciate any suggestions or ideas that could help identify the root cause.
Thank you in advance for your prompt and helpful replies!

[David (PassMark)]

There is no known problem like this, at least none where the problem is in our software.

Maybe the 5060 TI has a hardware fault?
Or maybe the PSU isn't adequate wattage for the extra load from the 5060 (compared to the 3060)?

There are some details for collecting logs here
https://www.passmark.com/support/bitdebug.php

But if it is a sudden complete lockup there might be nothing interesting in the log. (Can't write logs once the machine is totally frozen).

There are reports online however about general compatibility issues with 5 series cards and old Win10 releases.
I did some Googling for you and found these links
https://www.igorslab.de/en/nvidia-re...-an-exception/
https://www.techpowerup.com/337331/n...-black-screens

AI also made this comment, "Windows Build 1809 predates WDDM 2.7 (introduced in Windows 10 2004), meaning your OS lacks modern memory management features that newer NVIDIA driver branches assume are present on the system.". Don't know if it is true.

But it is sure you are running very new hardware on very old software. Likely a combo never tested by nVidia.