Announcement
Collapse
No announcement yet.
Raid 1 Mirror Errors - Data Verify Failure
Collapse
X
-
Yes, BurnInTest should work with all RAID configurations. As long you can assign a drive letter in Windows (e:, x:, y:....) then it should be fine.
-
Originally posted by passmark View PostThere is no good reason why a RAID disk should fail this test (except if it was a systematic faulty design or faulty units).
Leave a comment:
-
There is no good reason why a RAID disk should fail this test (except if it was a systematic faulty design or faulty units).
Leave a comment:
-
Raid 1 Mirror Errors - Data Verify Failure
Hi,
I am running BIT V5.1pro and using it to burn systems in overnight and generally test them.
I have 2 systems on test at the moment both 74gb Raid Mirror configurations, all the tests are fine except the Disk test, it comes back with the error "Data Verify Failure" for every cycle.
Test is set to Default (Cyclic)
Is this down to the system being a Raid 1 Mirror
TIA
JasonTags: None
Leave a comment: