Announcement

Collapse
No announcement yet.

Module passes in Memtest V7.3 but has no display on Gigabyte H110-MS2 motherboard.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Module passes in Memtest V7.3 but has no display on Gigabyte H110-MS2 motherboard.

    Hello David,

    The DDR4 - 4GB - Long Dimm module is Passing the Memtest V7.3 both on Asus Z170-K and Asus H110 MCS motherboard but this module does not give display on the Gigabyte H110-MS2 motherboard. (BIOS Version - F20 , Dated 11/16/2016).

    Please suggest the possible cause.

    Thanks

    Gagan


  • #2
    but this module does not give display
    We aren't sure what you mean by, "does not give display"?
    Can you provide more details.

    Comment


    • #3
      It does not Boot ..

      Comment


      • #4
        Dear David,

        These Modules are "ND" In Gigabyte GA H110M-S2 MB, but pass in Other MB's like Asus Z170,Z270,H110, MSI H110....

        Can you please provide me some solution for these modules... I have already Updated the MB BIOS to latest version F20.

        Comment


        • #5
          Maybe it is a problem with the board (and not the RAM). Does the Gigabyte board boot with different RAM from a different manufacturer?

          Comment


          • #6
            The Gigabyte board is OK. It is booting with different RAM

            Comment


            • #7
              Then likely it is a compatibility problem between that RAM and that motherboard, or maybe you have the BIOS settings incorrect for the RAM.

              Comment


              • #8
                Changed in BIOS under Advance memory setting - Relax OC.
                The module was working OK after keeping this setting in BIOS..

                Comment


                • #9
                  At the risk of stating the obvious, if the RAM fails when you overclock it, then don't overclock it.

                  Comment

                  Working...
                  X