ECC polling broken since 5.0b5 release

[victorz]

I have some known bad DDR3 ECC memory that can cause recoverable ECC errors.
5.0b5 catches these errors but b6, b7 and now b8 do not report these errors even with ECC polling enabled.

Attached are the memtest log for b5 (that works) and b8.

How to I attach txt log files? The uploader seems to only allow pictures???

B5 log
https://drive.google.com/file/d/0B0r...it?usp=sharing

B8 log
https://drive.google.com/file/d/0B0r...it?usp=sharing

[keith]

Thanks for the log files. Can you give this build a try (and upload the log file):

http://www.passmark.com/ftp/memtest8...b-5b8.1007.zip

[victorz]

Thanks for the log files. Can you give this build a try (and upload the log file):

http://www.passmark.com/ftp/memtest8...b-5b8.1007.zip

Yes this build works! Let me know if you need the log posted.

Also, any plans to enable a configuration screen on serial console and not have to attach VGA to configure the tests, etc.? Most of my servers are only attached with COM1 remote console redirection enabled.

[David (PassMark)]

For the record, so that we know what works and what doesn't, what motherboard was being used for this test?

[victorz]

We have a custom Intel Panther Point, C216 class motherboard.