MAXCPUS - mt86.cfg

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yoobongc
    Junior Member
    • Oct 2024
    • 7

    #1

    MAXCPUS - mt86.cfg

    1. running configuration : Intel GNR-AP CRB (dual CPUs - each CPU has 144 physical cores) + 24 DIMMs (12 DIMMs per each CPU)

    2. configured mt86.cfg
    - TSTLIST=6
    - CPUSEL=PARALLEL
    - MAXCPUS=512

    3. Problem statement:
    When running MemTest86, I thought all 288 cores would run simultaneously,
    but in reality, they seem to be split into groups of 144 cores taking turns running... Is this normal?
    How can I make all 288 cores run MemTest simultaneously?
  • yoobongc
    Junior Member
    • Oct 2024
    • 7

    #2
    In addition, I am using MemTest86 11.7 Pro version now.

    Comment

    • Simon (PassMark)
      Administrator
      • Apr 2021
      • 336

      #3
      By default MemTest86 only runs on physical cores, which is why it shows 144 active.

      To use all 288, you can either:

      Go to Config → CPU Selection in MemTest86 and enable Hyperthreading, or
      Remove hash in front the 'ENABLEHT=1' line to the mt86.cfg file in the \EFI\BOOT\ folder of the USB drive.

      Running on the extra logical cores usually doesn't add much to memory testing

      Comment

      • yoobongc
        Junior Member
        • Oct 2024
        • 7

        #4
        I have tried both case which are ENABLEHT=0 and ENABLEHT=1, results are not changed.
        Our server is DUAL Physical CPU which a CPU has 144 cores.
        I would like to run TWO CPUs are running simulaneoursly.
        But it loos like a CPU is running and another CPU is running righr after a CPU task is ended.

        Comment

        • yoobongc
          Junior Member
          • Oct 2024
          • 7

          #5
          for your better understanding...Click image for larger version

Name:	image.png
Views:	0
Size:	1.78 MB
ID:	60873

          Comment

          Working...