I am totally wireless (ie no phone land lines). I am trying to test a friend's PC modem. I have performed the loopback test and it works OK, but I would like to have two PC talk to each other by using a null modem cable. Without a phone line to dial out is there a way to start ModemTest so the two PC's will talk to each other?
Both PC's use PCI modems set as COM3 with RJ11 connectors. I have two 2 wire phone cables, one is a normal phone cable (pins 2 to 3 and pins 3 to 2) and one with the pins straight thru (pins 2 to 2 and pins 3 to 3). If the above ModemTest is possible which cable should I use?
If ModemTest is not capable of doing this type test, what other options would you recommend?
Thanks for you support!!!
James
Both PC's use PCI modems set as COM3 with RJ11 connectors. I have two 2 wire phone cables, one is a normal phone cable (pins 2 to 3 and pins 3 to 2) and one with the pins straight thru (pins 2 to 2 and pins 3 to 3). If the above ModemTest is possible which cable should I use?
If ModemTest is not capable of doing this type test, what other options would you recommend?
Thanks for you support!!!
James
Comment