USB3Test log file show “Diagnostics – Benchmark Read Failed” and “Diagnostics –Timeout reading benchmark data”, but No Error count.
Hi,
I plugin two USB3 loopback into my new MB and run the USB3 test benchmark test.
After 60 minutes test complete, the USB3 test summary show 0 Error count.
But I check the log file (USB3_benchmark_1_1211a.zip), there is one set “Diagnostics – Benchmark Read Failed” / “Diagnostics –Timeout reading benchmark data” message in log file.
Above message only happen 1 or 2 times in hour running.
But the message not count in test program error counter, it still show “0” after test complete.
So above test log show diagnostics message, is that a real error or just a notification for USB3 Test program?
Test Configuration
CPU: Intel i7-8665UE
OS: WIN10 x64 LTSC (Version 1809/ OS Build: 17763.805)
RAM: SODIMM DDR4-2400 16GB
Storage: NVME (M2 2280) 256GB
USB3 Test program Version: 2.0 ( 1008 )
USB3 Loopback F/W Version: V2.5
USB3 Loopback H/W Version: V1.0
USB3 loopback Driver version: 1.2.3.10
USB3Test configuration setting: I open two USB3 Test program, each test configuration are same.
(See 03 Test Configuration.png in USB3_benchmark_1_1211a.zip file)
Regards
Harry Wang
Feb/12/2020
Hi,
I plugin two USB3 loopback into my new MB and run the USB3 test benchmark test.
After 60 minutes test complete, the USB3 test summary show 0 Error count.
But I check the log file (USB3_benchmark_1_1211a.zip), there is one set “Diagnostics – Benchmark Read Failed” / “Diagnostics –Timeout reading benchmark data” message in log file.
Above message only happen 1 or 2 times in hour running.
But the message not count in test program error counter, it still show “0” after test complete.
So above test log show diagnostics message, is that a real error or just a notification for USB3 Test program?
Test Configuration
CPU: Intel i7-8665UE
OS: WIN10 x64 LTSC (Version 1809/ OS Build: 17763.805)
RAM: SODIMM DDR4-2400 16GB
Storage: NVME (M2 2280) 256GB
USB3 Test program Version: 2.0 ( 1008 )
USB3 Loopback F/W Version: V2.5
USB3 Loopback H/W Version: V1.0
USB3 loopback Driver version: 1.2.3.10
USB3Test configuration setting: I open two USB3 Test program, each test configuration are same.
(See 03 Test Configuration.png in USB3_benchmark_1_1211a.zip file)
Regards
Harry Wang
Feb/12/2020
Comment