information about test

[regminhin]

I performed 10 tests. The system was the same. The results were very different. I mean the ratio of the maximum result for the minimum.

In the tab "Summary" was:

PassMark Rating 1.71
CPU Mark 1.75
2D Graphics Mark 2.74
3D Graphics Mark 1.62
Memory Mark 3.42
Disk Mark 1.028

In separate tests the spread is even higher:

CPU - Encryption 4.78
Graphics 2D - Complex Vectors 6.18
Memory - Write 10.02

Only for disc test ratio max / min was stable.
The worst in terms of the parameters of the spread following section:

Disk - Sequential Write 1.096

My computer is old, but BurnIn test is successful.
No errors.

How to interpret these results?
What ratio of the maximum to the minimum of the results should show your program to a known-good computer?

[Richard (PassMark)]

How to interpret these results?

Q. I don't understand the results. What do all these numbers mean?

What ratio of the maximum to the minimum of the results should show your program to a known-good computer?

PerformanceTest is used to benchmark your system in which then you can use the results to compare with other systems to see how you stack up. If you feel there is something wrong with your machine, then you can use the Manage Baseline feature and search for systems with similar specs as your computer and compare.

If you think your system is running slow, also check the following thread, Causes and Solutions for a slow PC.