Very Low SSD scores compared to my last baseline passmark
Collapse
X
-
Indeed. ~7 Months.Took me a while
Yes, those write results as pretty bad for a M2 Drive.
Strangely I also had a low end Kingston M2 1TB drive I was using for backups. And it gave similar terrible results in real life and benchmarks. It was a long long way from Kingston's claimed specs. I eventually swapped it for a mid range Samsung and it was much better. I never got to the bottom of it. A mystery (or just deceptive marketing) I don't know.
Would be interesting to
1) Try the same drive in another machine
2) Reformat the drive to being empty and then try it again.
3) Swap the drive out for another brand (to see if it is a software issue or hardware).Leave a comment:
-
Took me a while but I did the test and here are the results. Please take a look. Thank you!
Leave a comment:
-
The standard disk tests in PerformanceTest are designed to be a fairly quick test.
But there is a more comprehensive test under the Advanced menu / Drive Performance.
Can you run that and see what the results are, (8GB+ file size, 40sec+ duration)
Leave a comment:
-
Did anything change on the machine?
This is a M2 drive right? Did the drive get moved to a new M2 slot? Did you install any new PCIe cards in other slots?
Was there a device driver update for the drive?
Can you check the temperature of the drive and the rest of the system when under load (maybe it is hotter in your room than a month ago).
I assume this in on Win10. So there should be no need to set the "TRIM" setting for the drive, but as something seems to be not right, it might be worth checking. Type this command into a CMD window
fsutil behavior query DisableDeleteNotify
it should return this
NTFS DisableDeleteNotify = 0 (Disabled)
Is the drive formatted with the NTFS file system?
Is the CPU & RAM performance on the machine OK?
- No physical changes are done to the machine because this is a new laptop still under warranty. (Bought it last month) No device driver update was done either.
- Temperature of the drive is as follows. Idle - 44°C Under load - 56°C (Maximum)
- I'm pretty sure room temperature hasn't changed as my room temperature is usually around 28°C.
- fsutil behavior query DisableDeleteNotify returns
- NTFS DisableDeleteNotify = 0 (Disabled) and NTFS ReFS DisableDeleteNotify = 0 (Disabled) both.
- Drive is NTFS.
- I ran both Intel Processor Diagnostic Tool and Windows Memory Diagnostic. They came up with no problems. CPU & RAM performance passmark is similar to that of the early passmark test too.
More details about laptop
i7 10870H Processor
16 GB DDR4-3200 (Dual Channel)
M.2 SSD slot (NVMe PCIe Gen3)
NVIDIA® GeForce RTX 3060 Laptop GPU 6GB GDDR6
Leave a comment:
-
Did anything change on the machine?
This is a M2 drive right? Did the drive get moved to a new M2 slot? Did you install any new PCIe cards in other slots?
Was there a device driver update for the drive?
Can you check the temperature of the drive and the rest of the system when under load (maybe it is hotter in your room than a month ago).
I assume this in on Win10. So there should be no need to set the "TRIM" setting for the drive, but as something seems to be not right, it might be worth checking. Type this command into a CMD window
fsutil behavior query DisableDeleteNotify
it should return this
NTFS DisableDeleteNotify = 0 (Disabled)
Is the drive formatted with the NTFS file system?
Is the CPU & RAM performance on the machine OK?
Leave a comment:
-
Yes I do. The drive model is Kingston OM8PCP31024F-Al1 (1 TB). Notice that Disk Sequential Write and IOPS 32KQD20 has dropped down drastically.- Total Disk Mark has dropped to 7,806 from 17,033 (From attached images from top post)
- IOPS 32KQD20 has dropped to 278 from 1,332
- Disk Sequential Write has dropped to 255 from 1,703
Leave a comment:
-
Do you have a record of the original results to compare to the new results.
What drive model is it?Leave a comment:
-
-
Thanks for the reply. Yes. I tried several times and comes up with same result. I waited for about 20 minutes after boot to make sure nothing is using the SSD. When SSD usage is at 0% or 1% I ran the test. I disabled antivirus as well. I ran the test multiple times. Here are the results from winsat disk -drive c. I even reinstalled the Performance Test again too. Still gives the same Disk Mark.1 PhotoLeave a comment:
-
Was anything running in the background that may be accessing the disk at the same time the benchmark was running? Try rerunning just the Disk Test to see if the results are consistent.
Leave a comment:
-
Very Low SSD scores compared to my last baseline passmark
Hello, My SSD Performance Test Passmark Score is really low compared to my last baseline passmark I did about a month ago. I first tested it on 18th September 2021 (last month). And when I ran the test today this is the result. It is really low compared to my original score. I'm really worried about the score. I did Hard Disk Sentinel health test and it says my SSD is fine. But why am I getting too low scores compared to my last baseline? Your help is much appreciated. Thanks in advance!
PS - I bought this laptop last month3 PhotosTags: None
Leave a comment: