HI Tim David Simon
Official download V10.1 1001,Advanced network can not run, help to see, after the trial version of normal to buy the official version
Announcement
Collapse
No announcement yet.
Advanced network error
Collapse
X
-
Test machine and remote machine are in a subnet, or error, The remote machine is started ,End Point
Leave a comment:
-
What do you mean when you say that there is no response? The images do not really help.
Can you enable trace level 2, run the advanced network test, and send us the logs for us to have a look?
Leave a comment:
-
Hi Select an advanced network using V10,start Bunrn No response
Leave a comment:
-
Yes, the simplest setup is to have the End Point machine and machine under test on the same sub-net.
Leave a comment:
-
Can the remote host and the host under test be in the same network segment, for example: Remote: 192.168.1.1 Host under test: 192.168.1.2
Leave a comment:
-
The remote machine needs to be reachable on the network for the network test to work, if it doesn't have a valid IP BurnInTest (or anything else) isn't going to be able to see it.
Leave a comment:
-
No, the remote machine is the default IP169XX, the test machine is 192XX, the Settings are the same, only V9 replaced with V10
Leave a comment:
-
There doesn't seem to be anything in the log you attached, perhaps there was another log created with a different name?
Is the system that is running the endpoint on the same subnet (192.168.1)?
Leave a comment:
-
There is no response after using V10 program
Leave a comment:
-
We don't support V9 of the software anymore. Can you try V10 for both the main software and the end point. Also don't be tempted to mix versions as we have never testing a V9 end point with V10 of the software.
Leave a comment:
-
I tried V9.2 1001,End The version is the same, or error,Help see Thank
Leave a comment:
-
Download V9 officially. The packaged version is V9 1002,Do you have V9 1009
Leave a comment:
-
There is a log message saying the End Point software isn't up to date.
Can you provide more details of the setup. What PC hardware, what networking environment, how many End Points do you have running?
Leave a comment:
-
Network, ENDPOINT VERSION V9.2 1002 x86 not current. Please update.
*edit* Or potentially a newer version, internally the endpoint version has changed but the endpoint packaged with V10 could still have the same external version identifier.Last edited by Tim (PassMark); Dec-31-2021, 01:37 AM.
Leave a comment:
Leave a comment: