Announcement

Collapse
No announcement yet.

Advanced network error

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cahozhang
    replied
    Originally posted by Tim (PassMark) View Post
    我认为当这么多卡试图启动高级测试时存在一些平衡问题,这导致网卡关闭已经打开的连接。

    我们将研究可以进行哪些更改,但与此同时,您需要减少随时测试的卡数量(或忽略测试前几分钟的 初始错误)。
    can now run several network cards,Or more than 10

    Leave a comment:


  • cahozhang
    replied
    Hi
    hello
    Errors occurred 1 ,烧录会出现错误红色
    Attached Files

    Leave a comment:


  • Tim (PassMark)
    replied
    The received/outbound error counts are from the network performance counters and are low level errors counts, they aren't included in the BurnInTest error count as they aren't visible from the application level and it hasn't interrupted the data transfer by that point (things like a TCP packet retransmission due to a timeout or loss).

    Leave a comment:


  • cahozhang
    replied
    What is this error,
    Attached Files

    Leave a comment:


  • Tim (PassMark)
    replied
    The endpoint couldn't load the "Network Interface" performance counters, possibly as it didn't have permission (ie not running as administrator) or they might not be available on the system.

    Click image for larger version

Name:	Network_Interface.png
Views:	432
Size:	80.8 KB
ID:	52286

    Leave a comment:


  • cahozhang
    replied
    What does this hint mean!
    Attached Files

    Leave a comment:


  • cahozhang
    replied
    thank,Now I'll run first, 6-nic,Disable the other two runs

    Leave a comment:


  • cahozhang
    replied
    (or ignore the initial errors in the first few minutes of the test),After an error occurs, is there a way to clear the error and complete the following tests

    Leave a comment:


  • cahozhang
    replied
    HI Tim
    There are other ways to go through the switch,EP0 EP1 still error

    Leave a comment:


  • Tim (PassMark)
    replied
    I think there are some balancing issues when so many cards are attempting to start the advanced test which is causing the network card to close the already open connections.

    We'll look into what changes could be made but in the meantime you will need to reduce your amount of cards being tested at any one time (or ignore the initial errors in the first few minutes of the test).

    Leave a comment:


  • cahozhang
    replied
    Add network with two settings,endpoint EP0 EP1 ,Only one endpoint is displayed,Another blank

    Leave a comment:


  • cahozhang
    replied
    burn 10-NIC 1. endpoint 10-NIC 2.endpoint 10-NIC error
    Attached Files

    Leave a comment:


  • cahozhang
    replied
    Test machine ,7 network cards,Still appear error, I want to ask ,Test machine ,7 network cards , endpoint ,How much do I need to insert ,log .zip
    Attached Files

    Leave a comment:


  • Tim (PassMark)
    replied
    You can run the endpoint.exe on another system connected to the same network, the broadcast message from BurnInTest should then find it.
    You can see the active endpoints in the advanced network test options by clicking the "Display endpoints" button.

    Leave a comment:


  • cahozhang
    replied
    try adding another endpoint to the network.How did you add it?,etwork interface,Bytes Total/sec Network adapter,Is that right
    Attached Files

    Leave a comment:

Working...
X