Tweet
Do you have an ETA for a new version that supports the Amd ryzen 9000 series processors
-
-
Software should mostly already work on these CPUs.
(the exception might be some temperature reporting information).
It normally take a few weeks before we can support new CPU families. Also depends a bit on if the vendors (intel, AMD) update their documentation and make it public (they often don't).
Is there something you are aware of that doesn't work?
-
Sorry I should have been more specific, its mainly temperature monitoring. Everything else seems to be working fine.Comment
-
We made an attempt at obtaining temperatures on Zen 5 chipsets. But we'll need to obtain some log files to verify.
Can you give this build a try:
https://www.passmark.com/temp/petst-...19-AMD1A_1.exe
Please run in DEBUGMODE as described in this page:
https://www.passmark.com/support/ptdebug.phpComment
-
-
Thanks for the logs.
We were able to make some fixes. Can you give this BurnInTest build a try:
https://www.passmark.com/temp/bitwin...14-AMD1A_1.exeComment
-
HI Keith, tested and working as expected on my test system, clock frequencies are a little out though but not important for my testing.
Will this come to V10?Comment
-
Thanks, good to hear it appears to be working. It will be part of the upcoming V11 release.
If possible, can you also run this build in debug mode and send a copy of the logs:
https://www.passmark.com/support/bitdebug.phpComment
-
Hi Keith, added it to the same google drive - Burnintest.zip
https://drive.google.com/drive/folde...g%26%238203%3BComment
Comment