BurnIn V11 1014 does not accumulate results between reboots/testruns

[DUTtester]

Hi all,
i was using BurnIn V10.2 before and everything was fine, results between reboots were accumulated (errors, testcycles, testduration,...).
Now in BurnInV11 the results are not accumulated anymore, the correct settings are set in the logging tab and single file is also choosen.

Im doing nothing different than in V10.2 and it does not accumulate between testruns and i have to view every error summary by hand inside the (long) logfile.
Has anybody experienced the same behaviour or has an hint for me to fix the not accumulating results/cycles/...?

Also i noticed that when using the AdvancedNet function in V11, the logfile gets a lot longer because of the adjustment-note of the NICload, can this be switched off to get not logged in the logfiles?

thanks in advance and BR

[David (PassMark)]

Can you post your V10 & V11 scripts or config files, etc.. (enough that we can attempt to reproduce the problem with your config)

[DUTtester]

Hi

the maschine starts a .bat file after boot and one line starts burnin like following:

call "C:\Program Files\BurnInTest\bit.exe" -r -LV

BurnIn is configured like following:







After the end of BurnIn (e.g. 5min testduration) BurnIn ends and closed itself (as it should do) and the script performs an reboot.
The reboot is done with an reboot script that is tested very well and the reboot itself is without any issue.

BurnInV10.2 is all good, no issue, testcycles/testduration/etc is accumulated across the testruns, but not in BurnInV11 (tested in Win10 and Win11)


If you need more information just let me know,
thanks in advance,
BR, =)

[Richard (PassMark)]

Thank you for the additional details and screenshot.

I was able to reproduce the bug. I believe I have located the issue and am working on a fix.

[DUTtester]

thanks for the information update.

i have one more question, would it also be possible to integrate the option to disable the advanced network information note inside the logfile? Or is there already an option for this and possibly i have not found it.



the logfiles gets very big now and need a lot more space to store them.

Thanks in advance and
BR =)

[Richard (PassMark)]

Those are debugging information entries. Those lines should only be visible in the logs when you have Trace Activity set to level 2 (or running in debug logging enabled).

[Simon (PassMark)]

thanks for the information update.

i have one more question, would it also be possible to integrate the option to disable the advanced network information note inside the logfile? Or is there already an option for this and possibly i have not found it.



the logfiles gets very big now and need a lot more space to store them.

Thanks in advance and
BR =)

Was able to reproduce, will be fixed in the next build

[DUTtester]

Was able to reproduce, will be fixed in the next build

my settings was like in the screenshot above:


since you have already reproduced the issue, im waiting for the next build update.
thanks in advance,
BR =)