new hard drive time?

[TheDaybreakBoy]

I think I'm probably screwed, but I would like a second opinion if anyone is willing to give it. Particularly; fails on reallocated sector rate, seek error rate, and write error count.
DiskCheckup Version: DiskCheckup V2.1 Build: 1002
SmartDisk DLL Version: SmartDisk DLL SDK v1.0 Build: 1016
Time of export: 10:28:20 18-Oct-2008
Device ID: 0
Device Capacity: 238472 MB
Serial Number: WD-WCANKM459247
Model Number: WDC WD2500BB-55RDA0
Firmware Revision: 20.00K20
Partitions:
G: 20002 MB
H: 218462 MB
IDE Registers:
Features: 0x0
Sector Count: 0x1
Sector Number: 0x1
Cylinder Low: 0x0
Cylinder High: 0x0
Drive Head: 0xA0
Command: 0xEC
ID Sector:
Cylinders: 16383
Heads: 16
Sectors per track: 63
Cur Cyls: 16383
Cur Heads: 16
Cur Sectors/Track: 63
Bytes per track: N.A.
Sectors per track: N.A.
Gen Config: 17018
Buffer Type: 0
Buffer Size: 4096
Vendor Unique: 0 0 0
More Vendor Unique: 0x8010
ECC Size: 50
Double Word IO: 0
Capabilities: 12032
PIO Timing: 0
DMA Timing: 0
BS: 7
Current Sector Capacity: 16514064
Total Addressable Sectors: 268435455
Mult. Sector Stuff: 272
Single Word DMA: 0
Multi Word DMA: 7

SMART ATTRIBUTES:
ID Description Raw Value Status Value Worst Threshold TEC
---------------------------------------------------------------------------------------------------------------------------------------------
1 Raw Read Error Rate 90309 OK 168 1 51 N.A.
3 Spin Up Time 5650ms OK 187 176 21 N.A.
4 Start/Stop Count 225 OK 100 100 0 N.A.
5 Reallocated Sector Count 764 FAIL 104 104 140 N.A.
7 Seek Error Rate 22066 FAIL 7 1 51 N.A.
9 Power On Time 3017 OK 96 96 0 N.A.
A Spin Retry Count 0 OK 100 100 51 N.A.
B Calibration Retry Count 0 OK 100 100 51 N.A.
C Power Cycle Count 225 OK 100 100 0 N.A.
C2 Temperature 36 C OK 114 100 0 N.A.
C4 Reallocation Event Count 578 OK 1 1 0 N.A.
C5 Current Pending Sector Count 0 OK 200 182 0 N.A.
C6 Uncorrectable Sector Count 0 OK 200 182 0 N.A.
C7 UltraDMA CRC Error Count 0 OK 200 200 0 N.A.
C8 Write Error Count 10598 FAIL 1 1 51 N.A.

[David (PassMark)]

If you can still access the files on the hard drive, backup everything immediately.
If the drive is under warranty, return it for replacement.
Otherwise be prepared for a total failure some time soon.

[TheDaybreakBoy]

Thank you, I suspected that was true. I started backing everything up as soon as I became aware of the problem, it's actually a nice excuse for a spring clean.

Thank you for the quick reply.