Announcement

Collapse
No announcement yet.

Passmark Hardware calibration.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Passmark Hardware calibration.

    Hi we need to know the calibration details of Hardware devices provided by passmark and the lifecycle(How many cycles it can be used) of the devices.
    These are the following hardware devices we are using, for these devices we need to know the calibration and lifecycle details.
    • USB 3.0 Loopback Plug + cable.
    • Serial Loopback Plug.
    • USB Short Circuit Tester.
    • Audio Loopback cable.
    • Passmark Software Bootable UFD.

  • #2
    • USB 3.0 Loopback Plug + cable.
      No calibration possible.
    • Serial Loopback Plug.
      No calibration possible (it is after all just a copper wire).
    • USB Short Circuit Tester.
      No calibration possible
    • Audio Loopback cable.
      No calibration possible (again, it is just a cable, not a measurement device).
    • Passmark Software Bootable UFD.
      No calibration possible. This is a flash drive with software. You can't calibrate a flash drive.

    How many cycles they can be used depends on how roughly you treat them. All connectors will eventually wear out after 1000 of insertions.

    Comment

    Working...
    X