Tweet
CPU: Ryzen 5 3600
MOBO: ASUS Prime X570-P
RAM: 16 GB Corsair Vengeance LPX DDR4-3600
STORAGE: Samsung 970 EVO 500GB
VIDEO CARD: MSI Radeon RX 5700 Mech OC
PSU: Gigabyte B700H
So I build this new PC and install Windows 10 on it, everything is going great. I download programs and update various drivers the new PC stuff. Then I install Ryzen Master and the latest driver for my graphics card. I try PBO because why not and it runs a stress test. While the stress test is running Windows freezes and the computer restarts. Now it's stuck in a boot loop where it barely loads Windows before doing the same thing over and over. Sometimes the preparing automatic repair text shows up but it still restarts every time. I can get into the BIOS fine. I've tried clearing CMOS about 10 times already and it's not helping. I created a recovery flash drive but that doesn't boot either. Moving the RAM around allowed the tiny spinning balls to show up for a half a second before the same thing happens. Memtest also crashes while it is running passes. I also tried flashing an older version of the BIOS but it hasn't helped.
After testing the ram individually and having both of them crash as soon as test 2 starts, I set the test to use only 1 core and now its running perfectly fine with no errors. Did the stress test damage my power supply and/or motherboard and/or CPU?
MOBO: ASUS Prime X570-P
RAM: 16 GB Corsair Vengeance LPX DDR4-3600
STORAGE: Samsung 970 EVO 500GB
VIDEO CARD: MSI Radeon RX 5700 Mech OC
PSU: Gigabyte B700H
So I build this new PC and install Windows 10 on it, everything is going great. I download programs and update various drivers the new PC stuff. Then I install Ryzen Master and the latest driver for my graphics card. I try PBO because why not and it runs a stress test. While the stress test is running Windows freezes and the computer restarts. Now it's stuck in a boot loop where it barely loads Windows before doing the same thing over and over. Sometimes the preparing automatic repair text shows up but it still restarts every time. I can get into the BIOS fine. I've tried clearing CMOS about 10 times already and it's not helping. I created a recovery flash drive but that doesn't boot either. Moving the RAM around allowed the tiny spinning balls to show up for a half a second before the same thing happens. Memtest also crashes while it is running passes. I also tried flashing an older version of the BIOS but it hasn't helped.
After testing the ram individually and having both of them crash as soon as test 2 starts, I set the test to use only 1 core and now its running perfectly fine with no errors. Did the stress test damage my power supply and/or motherboard and/or CPU?
Comment