Parallel (All CPUs)

[joe25]

Dear Passmark,
I wanted to check if I am seeing this correctly. When I select "Parallel (All CPUs)" with all Test Selections then Start;
What I see is
CPUs Found: 8
CPUs Started: 1
CPUs Active: 1

Shouldn't Started and Active be more than 1?

I'm using MemTest V5.1.0 Pro with Intel Core i7-2710QE

Thank you for any advice.

[keith]

It is likely that your system's UEFI firmware (BIOS) does not have proper multiprocessor support, so MemTest86 is only able to run in single CPU mode. We can verify this by having a look at the MemTest86.log that is stored under EFI\BOOT. You can upload or e-mail it to us.

Also check for the latest BIOS update from your motherboard vendor.

[joe25]

Thanks Keith for the quick reply. I just emailed the log and test results file to info@.

Thanks again for your help.