Announcement

Collapse
No announcement yet.

mt86.cfg location

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mt86.cfg location

    Hello,
    Just starting out with the memtest pro and my first attempt at using a mt86.cfg does not seem to have worked via USB. Trying to just run test 0 and have it save a report.
    I put the mt86.cfg file under the /EFI/BOOT/ directory (alongside the blacklist.cfg). Is this the proper location for the file?
    The test did run, but it ran all the tests, and required me to manually chose to save the report (after ending early).

    Code:
    TSTLIST=0
    NUMPASS=2
    ADDRLIMLO=0x10000000
    ADDRLIMHI=0x20000000
    MEMREMMB=16
    MINMEMRANGEMB=16
    CPUSEL=PARALLEL
    CPULIST=1,2,3,4,5,6,7,8
    MAXCPUS=32
    DISABLEMP=0
    ENABLEHT=0
    ECCPOLL=1
    ECCINJECT=1
    MEMCACHE=1
    PASS1FULL=0
    LANG=en-US
    REPORTNUMERRS=5000
    REPORTNUMWARN=0
    REPORTPREFIX=BASEBOARDSN
    AUTOMODE=0
    AUTOREPORT=1
    AUTOREPORTFMT=HTML
    AUTOPROMPTFAIL=1
    SKIPSPLASH=1
    EXITMODE=1
    MINSPDS=0
    EXACTSPDS=0
    EXACTSPDSIZE=8192
    CHECKMEMSPDSIZE=0
    CONSOLEMODE=1
    CONSOLEONLY=1
    BITFADESECS=300
    MAXERRCOUNT=10000
    TFTPSERVERIP=192.168.88.2
    TFTPSTATUSSECS=60
    PMPDISABLE=1
    RTCSYNC=0
    TRIGGERONERR=1
    VERBOSITY=1
    TPL=HIGH_LEVEL
    Last edited by vacca@flaxadvisors.com; 06-22-2022, 05:45 PM.

  • #2
    Yes the mt86.cfg file should be in the \EFI\BOOT folder.

    Are you sure you are running the Pro edition and not the Free edition ?

    Comment


    • #3
      I was sure I was running the pro.....but then I double checked and I was not. Thank you!

      Comment

      Working...
      X