Tweet
Hello,
Just starting out with the memtest pro and my first attempt at using a mt86.cfg does not seem to have worked via USB. Trying to just run test 0 and have it save a report.
I put the mt86.cfg file under the /EFI/BOOT/ directory (alongside the blacklist.cfg). Is this the proper location for the file?
The test did run, but it ran all the tests, and required me to manually chose to save the report (after ending early).
Just starting out with the memtest pro and my first attempt at using a mt86.cfg does not seem to have worked via USB. Trying to just run test 0 and have it save a report.
I put the mt86.cfg file under the /EFI/BOOT/ directory (alongside the blacklist.cfg). Is this the proper location for the file?
The test did run, but it ran all the tests, and required me to manually chose to save the report (after ending early).
Code:
TSTLIST=0 NUMPASS=2 ADDRLIMLO=0x10000000 ADDRLIMHI=0x20000000 MEMREMMB=16 MINMEMRANGEMB=16 CPUSEL=PARALLEL CPULIST=1,2,3,4,5,6,7,8 MAXCPUS=32 DISABLEMP=0 ENABLEHT=0 ECCPOLL=1 ECCINJECT=1 MEMCACHE=1 PASS1FULL=0 LANG=en-US REPORTNUMERRS=5000 REPORTNUMWARN=0 REPORTPREFIX=BASEBOARDSN AUTOMODE=0 AUTOREPORT=1 AUTOREPORTFMT=HTML AUTOPROMPTFAIL=1 SKIPSPLASH=1 EXITMODE=1 MINSPDS=0 EXACTSPDS=0 EXACTSPDSIZE=8192 CHECKMEMSPDSIZE=0 CONSOLEMODE=1 CONSOLEONLY=1 BITFADESECS=300 MAXERRCOUNT=10000 TFTPSERVERIP=192.168.88.2 TFTPSTATUSSECS=60 PMPDISABLE=1 RTCSYNC=0 TRIGGERONERR=1 VERBOSITY=1 TPL=HIGH_LEVEL
Comment