If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Asus p8h61-m lx3 rev 1.0 all uefi MT hangs in menu
Hard to believe, but connecting mouse solved issue!
MT now can load and exit without hanging. Strange magic. Usually i do not use mouse when testing memory at all.
But tests run only with one core. Trying to change this setting in menu brings message "CPUSEL cannot be set to multi-CPU mode due to UEFI firmware limitations".
Recently tested bunch of Asus h61m-k + i5-3570 + 2*4gb - worked without issues. There was firmware 0801 2014-07-21, here is 0601 2014-03-27 - all versions last and latest.
And tons of "WaitForEvent returned error: Invalid Parameter" in log.
Asus p8h61-m lx3 rev 1.0 all uefi MT hangs in menu
Hello.
Here is some logs and photos.
Got bunch of old mbs to test and there is problem - UEFI MT hangs after loading part of main menu.
Tryed 10.4 and 9.4. Both hangs. Old 4.3.7 run fine, no errors.
Tryed on different sets of hardware "low-end" p8h61-m + pentium G840 + 2x4gb-1333 different modules and "high-end" p8h61-m + core i5-3570 + 2x4gb-1600 same modules
Photos and 9.4 log from pentium set, two 10.4 logs from core i5 set.
But there is some magic - if option SKIPSPLASH=1 is disabled UEFI MT loads and run tests, but with only one core enabled.
After test is stopped MT, all graphics and resuls are shown, hang on returning to main menu.
I thought it may be some video glitch, even tryed different monitor - samsung n720 (square 1280*1024) - no effect.
Leave a comment: