Announcement

Collapse
No announcement yet.

Advanced network error

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Sounds like the endpoint is being overloaded, try adding another endpoint to the network.

    Comment


    • #32
      try adding another endpoint to the network.How did you add it?,etwork interface,Bytes Total/sec Network adapter,Is that right
      Attached Files

      Comment


      • #33
        You can run the endpoint.exe on another system connected to the same network, the broadcast message from BurnInTest should then find it.
        You can see the active endpoints in the advanced network test options by clicking the "Display endpoints" button.

        Comment


        • #34
          Test machine ,7 network cards,Still appear error, I want to ask ,Test machine ,7 network cards , endpoint ,How much do I need to insert ,log .zip
          Attached Files

          Comment


          • #35
            burn 10-NIC 1. endpoint 10-NIC 2.endpoint 10-NIC error
            Attached Files

            Comment


            • #36
              Add network with two settings,endpoint EP0 EP1 ,Only one endpoint is displayed,Another blank

              Comment


              • #37
                I think there are some balancing issues when so many cards are attempting to start the advanced test which is causing the network card to close the already open connections.

                We'll look into what changes could be made but in the meantime you will need to reduce your amount of cards being tested at any one time (or ignore the initial errors in the first few minutes of the test).

                Comment


                • #38
                  HI Tim
                  There are other ways to go through the switch,EP0 EP1 still error

                  Comment


                  • #39
                    (or ignore the initial errors in the first few minutes of the test),After an error occurs, is there a way to clear the error and complete the following tests

                    Comment


                    • #40
                      thank,Now I'll run first, 6-nic,Disable the other two runs

                      Comment


                      • #41
                        What does this hint mean!
                        Attached Files

                        Comment


                        • #42
                          The endpoint couldn't load the "Network Interface" performance counters, possibly as it didn't have permission (ie not running as administrator) or they might not be available on the system.

                          Click image for larger version

Name:	Network_Interface.png
Views:	432
Size:	80.8 KB
ID:	52286

                          Comment


                          • #43
                            What is this error,
                            Attached Files

                            Comment


                            • #44
                              The received/outbound error counts are from the network performance counters and are low level errors counts, they aren't included in the BurnInTest error count as they aren't visible from the application level and it hasn't interrupted the data transfer by that point (things like a TCP packet retransmission due to a timeout or loss).

                              Comment


                              • #45
                                Hi
                                hello
                                Errors occurred 1 ,烧录会出现错误红色
                                Attached Files

                                Comment

                                Working...
                                X